Highlight:
material handling lifts
, hydraulic scissor lift table
Scissor Hydraulic Lift Platform , 2T 5.5M High Rising Material Handling Lifts CE TUV SGS
2T 5.5M High Rising Hydraulic Scissor Lift Scissor Cargo Lift with CE TUV SGS:
Application:
The Hydraulic Scissor Lift is convenient, efficient and safe ways to transport cargo from one floor to another. With our exceptional loading capacity of 100T, you can be assured that our scissor lifts are the best solution for all but the heaviest of cargo.
Our scissor lift table can be installed in a pit, ensuring stability and safety for the workers, and have
been especially designed to lift cargo and cars with the greatest of ease.
Parts Introduction:
1. Anti-ski platform: To protect materials from falling.
2. Safety trip bar: It located directly underneath the platform to prevent injury from use.
3. Hydraulic cylinder: High precision wear-resisting hydro-cylinder with locking device for fall protection.
4. Scissor structure: High-strength Manganese steel.
5. Control box: The "UP", "DOWN" and "EMERGENCY STOP" buttons are extremely easy to use on each floor.
6. Pump station: Provide a certain pressure and flow of hydraulic oil.
7. Lifting hook: It’s easier for crane to put it into the pit.
The models we supplied for clients:
|
MODEL
|
LOAD CAPACITY
|
PLATFORM SIZE
|
LIFT HEIGHT
|
PIT DEPTH
|
POWER
|
|
SJG3-2.5
|
3T
|
2m x 3m
|
2.5m
|
500mm
|
220V, 240V, 380V or 400V
|
|
SJG3-3
|
3T
|
5.2m x 2.6m
|
3m
|
750mm
|
220V, 240V, 380V or 400V
|
|
SJG3-5
|
3T
|
5.6m x 2.7m
|
5m
|
800mm
|
220V, 240V, 380V or 400V
|
|
SJG8-2.5
|
8T
|
6.5m x 4.5m
|
2.5m
|
750mm
|
220V, 240V, 380V or 400V
|
|
SJG12-3
|
12T
|
5.5m x 2.8m
|
3m
|
850mm
|
220V, 240V, 380V or 400V
|
|
SJG60-2.5
|
60T
|
8m x 2.2m
|
2.5m
|
950mm
|
220V, 240V, 380V or 400V
|
|
The scissor lift can be customized as your detailed size.
|
The products:
Safety:
1. The platform equipped with antiskid plate to prevent slipping, it is enough safe when it works.
2. The work table would equipped the guardrail to guarantee the safety.
3. The lift has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity.
4. The machine equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position.
Configuration:
1) Platform Material: rectangular tube + checkered iron
2) Scissor material: high strength Manganese Steel.
3) Hydraulic system: 380V/5.5Kw
4) High Precision Hydraulic Cylinder
5) Piston Rod: 70*4 hard chromium plating surface.
6) High-pressure oil pump
7) Hydraulic oil: summer 46#, winter 32#
8) Controller: 1 control box below, 1 control panel above platform
The Certificates:
Our services:
1) The Mini Hydraulic Scissor Lift can be done as your request
2) Shipment can be arranged from our port to your destination port.
3) Operation video can be sent to you if needed.
4) English manual for car lift installation , using and maintenance.
5) 2 years warranty for whole machine without man-made faults.
6) We will send you parts for free with non-human factor faults during warranty time.
7) Supply 24-hours technical assistance by email, telephone or skype.
8) Engineers are available to your country if necessary.
Your message must be between 20-3,000 characters!
