Product Details
Place of Origin: Shandong, China
Brand Name: Shandong Shiqi Machinery
Certification: CE
Model Number: SJG3-1.8LP
Payment & Shipping Terms
Minimum Order Quantity: 1 Set
Price: USD 2,980 - 3,450 / Set
Packaging Details: Plywood case and steel frame, seaworthy export packing
Delivery Time: 25-35 days after deposit
Payment Terms: T/T, L/C at sight
Supply Ability: 60 Sets per Month
Rated Load: |
3,000 Kg |
Lifting Height: |
1,800 Mm |
Collapsed Height: |
115 Mm |
Platform Size: |
4,500 X 2,000 Mm |
Power Supply: |
220V / 60Hz / 1 Phase |
Control Mode: |
24V Hand Pendant + Wall Box |
Scissor Material: |
Q345B Manganese Steel |
Deck Surface: |
Anti Skid Checkered Plate |
Safety Device: |
Mechanical Pawl Lock + Hose Burst Valve |
Net Weight: |
1,150 Kg |
Warranty: |
24 Months |
Rated Load: |
3,000 Kg |
Lifting Height: |
1,800 Mm |
Collapsed Height: |
115 Mm |
Platform Size: |
4,500 X 2,000 Mm |
Power Supply: |
220V / 60Hz / 1 Phase |
Control Mode: |
24V Hand Pendant + Wall Box |
Scissor Material: |
Q345B Manganese Steel |
Deck Surface: |
Anti Skid Checkered Plate |
Safety Device: |
Mechanical Pawl Lock + Hose Burst Valve |
Net Weight: |
1,150 Kg |
Warranty: |
24 Months |
In California, Oregon and Washington, most single family homes were built with a garage ceiling between 2.4 m and 2.7 m, which rules out a two post hoist and even most mid rise tables. This 3 ton low profile scissor car lift was designed around that constraint. The whole platform folds down to a 115 mm collapsed height, so an everyday sedan, SUV or electric crossover drives straight on without ramps, and the ceiling still has room for the garage door track.
The lift is a drive on mid rise scissor design with a 1,800 mm lifting height. That is enough working room for brake jobs, tire rotation, suspension inspection, undercarriage washing and pre purchase checks, while remaining fully portable when the optional caster set is fitted. Deck length is 4,500 mm and usable width 2,000 mm, so a Tesla Model Y or a Ford F-150 fits comfortably with the wheels sitting inside the anti skid runways.
Key Features| Parameter | Specification |
|---|---|
| Rated Load Capacity | 3,000 kg / 6,600 lb |
| Maximum Lifting Height | 1,800 mm |
| Collapsed Height | 115 mm |
| Platform Size | 4,500 x 2,000 mm |
| Drive On Runway Width | 500 mm each side |
| Lifting Motor | 2.2 kW, 220V / 60Hz / 1 Phase |
| Control Voltage | 24V DC hand pendant + wall control box |
| Scissor Arm Material | Q345B high strength manganese steel |
| Deck Surface | 5 mm anti skid checkered plate, powder coated |
| Lifting Time | 25 - 30 seconds |
| Net Weight | 1,150 kg |
| Safety Devices | Mechanical pawl lock, hose burst valve, overload cut off |
This is the practical answer for home mechanics, mobile detailers, small tire shops and classic car collectors who work out of a residential garage. Because the deck is only 115 mm high when closed, it doubles as a parking platform: drive on, lift 200 mm, and the car sits clear of the slab. Farmers in the Central Valley use it for UTV and small tractor servicing, and EV owners use the free wheel access for tire rotation without jack stands.
Installation And Site PreparationInstallation takes about two hours with two people. The lift arrives as one welded frame plus bolt on runways, and it needs only a 100 mm reinforced concrete slab with 3,000 psi compressive strength, no pit and no anchors into the ceiling. We supply a 1:20 site drawing, a wiring diagram for a 220V 20A dedicated circuit and a bilingual manual. If the slab is thinner than 100 mm, we recommend a 1,200 x 1,200 mm local pad under each scissor foot.
Market Fit And ShippingFor North American buyers the electrical side is already adapted: UL listed motor, 60Hz windings, NEMA 6-20 plug, imperial fasteners on request and a manual in inches. Shipping to Los Angeles or Long Beach takes 18 to 22 days from Qingdao, and we consolidate up to six units in one 20GP container, which usually cuts the per unit freight by about 25 percent compared with LCL.
Build Quality And Quality AssuranceOur workshop in Shandong has built scissor lifting equipment since 2001 and exports 50 to 60 percent of output to North America and Europe. Before packing, each unit runs a 50 cycle up and down test, a 1.2 times static overload test and a 500V insulation resistance check, and the results are recorded against the serial number. The CE certificate, test report, hydraulic schematic and spare parts list are sent as a PDF pack with the shipping documents.
Ordering NotesModel reference SJG3-1.8LP. Custom capacities, platform sizes and control configurations are available; send us your vehicle mix, site dimensions and electrical supply, and we will return a dimensioned proposal with drawings.