logo
Shandong Lift Machinery Co.,Ltd
Products
Products
Home > Products > Scissor Car Lift > 5 Ton Full Rise Pit Mounted Hydraulic Scissor Car Lift Space Saving Design for Texas Dealership Showrooms

5 Ton Full Rise Pit Mounted Hydraulic Scissor Car Lift Space Saving Design for Texas Dealership Showrooms

Product Details

Place of Origin: Shandong, China

Brand Name: Shandong Shiqi Machinery

Certification: CE

Model Number: SJG5-5.5

Payment & Shipping Terms

Minimum Order Quantity: 1 Set

Price: USD 6,400 - 7,900 / Set

Packaging Details: Plywood case and steel frame, seaworthy export packing

Delivery Time: 25-35 days after deposit

Payment Terms: T/T, L/C at sight

Supply Ability: 60 Sets per Month

Get Best Price
Highlight:

Pit Mounted Scissor Car Lift

,

5 Ton Full Rise Car Lift

,

Dealership Showroom Car Lift

Rated Load:
5,000 Kg
Lifting Height:
5,500 Mm
Platform Size:
5,600 X 2,800 Mm
Pit Depth:
800 Mm
Cylinder:
4 X 180 Mm Bore
Power Supply:
380V / 60Hz / 3 Phase
Lifting Speed:
3 - 4 M/min
Control Mode:
PLC + Remote + Manual Valve
Platform Surface:
10 Mm Checkered Plate
Net Weight:
2,800 Kg
Warranty:
24 Months
Rated Load:
5,000 Kg
Lifting Height:
5,500 Mm
Platform Size:
5,600 X 2,800 Mm
Pit Depth:
800 Mm
Cylinder:
4 X 180 Mm Bore
Power Supply:
380V / 60Hz / 3 Phase
Lifting Speed:
3 - 4 M/min
Control Mode:
PLC + Remote + Manual Valve
Platform Surface:
10 Mm Checkered Plate
Net Weight:
2,800 Kg
Warranty:
24 Months
5 Ton Full Rise Pit Mounted Hydraulic Scissor Car Lift Space Saving Design for Texas Dealership Showrooms

Dealers in Dallas, Houston and San Antonio pay for floor area, not for ceiling height. A pit mounted scissor car lift solves that equation by burying the whole mechanism below the slab and returning the footprint to showroom use when the platform is down. Only a 5,600 x 2,800 mm steel plate remains visible at floor level, flush with the polished concrete and strong enough to drive over every day.

This 5 ton full rise model lifts to 5,500 mm, which allows one vehicle to be stored or displayed above another and gives a technician standing clearance underneath for inspection, photography or pre delivery preparation. With a 800 mm pit depth and a 3 to 4 m/min travel speed, a full cycle takes around 30 seconds, fast enough for a busy service drive in the morning peak.

Key Features
  • Zero Floor Space Loss: the scissor stack and cylinders sit inside a 800 mm pit, so the showroom keeps a clean floor when the platform is parked at grade.
  • 5,000 kg Capacity With Four 180 mm Cylinders: four cylinders push from four points instead of two, so a long wheelbase pickup does not rock when one corner is loaded.
  • Full Rise 5,500 mm Travel: the height supports double level display, underbody inspection, wheel free access with optional jacking beams and photo shoots under the vehicle.
  • PLC Plus Remote Plus Manual Control: the operator can run the lift from a fixed panel, a radio remote or a manual valve bank if the site loses power.
  • Flush Steel Deck With Anti Skid Finish: the platform top is checkered plate with a recessed frame, so tires roll on without a lip and cleaning crews can sweep straight across.
  • Four Point Mechanical Locking: the platform locks at 1.2 m, 3 m and 5.5 m, giving the technician a hard mechanical stop before any work starts overhead.
  • Hot Dip Galvanized Pit Frame Option: for sites with groundwater or coastal humidity, the pit frame can be galvanized to 85 micron zinc, which is common practice in Houston and Corpus Christi.
Technical Specifications
ParameterSpecification
Rated Load Capacity5,000 kg / 11,000 lb
Maximum Lifting Height5,500 mm
Platform Size5,600 x 2,800 mm
Pit Depth Required800 mm
Hydraulic Cylinders4 x 180 mm bore, chrome plated rod 70 mm
Power Pack7.5 kW, 380V / 60Hz / 3 Phase
Lifting Speed3 - 4 m/min
Control SystemPLC cabinet + radio remote + manual valve
Platform SurfaceCheckered steel plate, 10 mm
Scissor Arm Material300 x 150 x 10 mm manganese steel
Net Weight2,800 kg
Locking Positions1.2 m / 3.0 m / 5.5 m mechanical stops
Applications

Typical installations are franchise dealership showrooms, luxury used car lots, high rise condo parking, museum style display floors and quick service bays where the lift doubles as a work station. In Texas, where summer slab temperatures exceed 40 degrees, the power pack is mounted in a ventilated pit niche with a fan assisted oil cooler, so the hydraulic temperature stays under 60 degrees during a ten hour shift.

Installation And Site Preparation

The pit is the only serious civil work. We provide a 1:50 pit drawing with rebar schedule, drainage sump position, conduit entries and lift beam locations, and our engineer reviews the contractor drawing before the concrete is poured. Depth tolerance is plus or minus 10 mm across the 5.6 m length, which the contractor achieves with a laser screed. We supply four anchor templates and a levelling jig so the rail line is set before the second pour.

Market Fit And Shipping

North American orders are wired for 380V 60Hz three phase or 480V through a step down transformer, and the pit frame is drilled for imperial anchor bolts. We ship to Houston and Long Beach in 22 to 26 days, pack the hydraulic unit in a separate crate so the pit stays clear during civil works, and can dispatch a commissioning video call at no charge during first lift.

Build Quality And Quality Assurance

Every pit mounted unit is assembled in our yard before shipment, run through 60 lift cycles and a 1.2 times static load test, then documented with photographs of the actual serial number. Because these lifts carry vehicles above people, we treat the safety documentation as part of the product: CE declaration, EN 1570 calculation notes, hydraulic schematic, electrical drawing and a two year warranty on the power pack and cylinders are supplied with each set.

Ordering Notes
  • Send the pit drawing to our engineer for a free review before pouring concrete.
  • Confirm whether the platform is used for display only or for underbody work, as jacking beams differ.
  • Galvanized pit frame and oil cooler are optional and quoted separately.
  • Production takes 25 to 30 days, and the hydraulic crate ships separately from the steel structure.

Model reference SJG5-5.5. Custom capacities, platform sizes and control configurations are available; send us your vehicle mix, site dimensions and electrical supply, and we will return a dimensioned proposal with drawings.