Product Details
Place of Origin: Shandong, China
Brand Name: Shandong Shiqi Machinery
Certification: CE
Model Number: SJG3.5-3.2CC
Payment & Shipping Terms
Minimum Order Quantity: 1 Set
Price: USD 4,600 - 5,300 / Set
Packaging Details: Plywood case and steel frame, seaworthy export packing
Delivery Time: 25-35 days after deposit
Payment Terms: T/T, L/C at sight
Supply Ability: 60 Sets per Month
Rated Load: |
3,500 Kg |
Lifting Height: |
3,200 Mm |
Platform Size: |
5,200 X 2,600 Mm |
Pit Depth: |
750 Mm |
Power Supply: |
220V / 60Hz / 3 Phase |
Hydraulic Oil: |
Synthetic ISO 32, -30 C |
Operating Temperature: |
-30 C To +45 C |
Cylinder: |
4 X 160 Mm Bore |
Lifting Speed: |
3 M/min |
Net Weight: |
2,100 Kg |
Warranty: |
24 Months |
Rated Load: |
3,500 Kg |
Lifting Height: |
3,200 Mm |
Platform Size: |
5,200 X 2,600 Mm |
Pit Depth: |
750 Mm |
Power Supply: |
220V / 60Hz / 3 Phase |
Hydraulic Oil: |
Synthetic ISO 32, -30 C |
Operating Temperature: |
-30 C To +45 C |
Cylinder: |
4 X 160 Mm Bore |
Lifting Speed: |
3 M/min |
Net Weight: |
2,100 Kg |
Warranty: |
24 Months |
At minus 25 degrees in Alberta or Quebec, ordinary 46# hydraulic oil turns to jelly and the pump screams for ten seconds before anything moves. This cold climate scissor car lift is built the other way around: it ships with synthetic low pour point oil rated to minus 30 degrees, a 60 degree C thermostat controlled cabinet heater and cold flexible hydraulic hoses that stay supple in a frozen garage.
The 3.5 ton platform lifts to 3,200 mm and uses four 160 mm cylinders fed through a manifold with a soft start valve, so the first lift of a January morning is as smooth as the tenth. The motor is wound for 220V 60Hz three phase and fitted with a low temperature bearing grease rated to minus 40 degrees, which removes the usual cold start bearing whine.
Key Features| Parameter | Specification |
|---|---|
| Rated Load Capacity | 3,500 kg / 7,700 lb |
| Maximum Lifting Height | 3,200 mm |
| Platform Size | 5,200 x 2,600 mm |
| Pit Depth Required | 750 mm |
| Hydraulic Cylinders | 4 x 160 mm bore, chrome plated rod |
| Power Pack | 5.5 kW, 220V / 60Hz / 3 Phase |
| Hydraulic Oil | Synthetic ISO 32, pour point -30 C, filled |
| Operating Temperature | -30 C to +45 C |
| Cabinet Heater | 60 degree C thermostat controlled |
| Lifting Speed | 3 m/min at rated load |
| Net Weight | 2,100 kg |
| Surface Treatment | Hot dip galvanized deck edge + epoxy frame coat |
These lifts go into heated and unheated residential garages, municipal works depots, snow plow maintenance bays, car rental return centres and small rural workshops from Ontario to British Columbia. Municipal fleets value the galvanized deck because calcium chloride brine from winter roads strips paint quickly, and rental companies value the cold start reliability because a lift that hesitates at 6 am costs them a bay for the whole morning.
Installation And Site PreparationSite preparation follows the same 750 mm pit logic as a standard model, with two extra details for cold regions: the pit sump is positioned below the frost line with a heat trace option, and the drain discharges into a floor trench rather than an exterior line that could freeze. We supply a winter commissioning checklist covering oil viscosity verification, heater circuit test and a fifteen minute cold soak run before the first vehicle is loaded.
Market Fit And ShippingCanadian orders are built with CSA recognized components, 60Hz motors, imperial hardware and a bilingual English French manual. We ship to Vancouver and Montreal in 20 to 24 days, and because the oil is already filled, the crate is marked accordingly for transport. Colder sites can add a 2 kW pit heater and an insulated pit cover, which keeps the pit above freezing without heating the whole garage.
Build Quality And Quality AssuranceCold climate units are tested in our cold chamber at minus 25 degrees for four hours, then cycled ten times to confirm the pump draws cleanly and the seals hold. We have supplied winterised lifts to Canadian and Nordic customers since 2014, and the field feedback shaped the current design: the heater location, the hose grade and the galvanized deck edge all came from service reports rather than a catalogue.
Ordering NotesModel reference SJG3.5-3.2CC. Custom capacities, platform sizes and control configurations are available; send us your vehicle mix, site dimensions and electrical supply, and we will return a dimensioned proposal with drawings.