Product Details
Place of Origin: Shandong, China
Brand Name: Shandong Shiqi Machinery
Certification: CE
Model Number: DDG3.5-2.8CC
Payment & Shipping Terms
Minimum Order Quantity: 1 Set
Price: USD 6,300 - 7,100 / Set
Packaging Details: Plywood case and steel frame, seaworthy export packing
Delivery Time: 25-40 days after deposit
Payment Terms: T/T, L/C at sight
Supply Ability: 50 Sets per Month
Load Per Deck: |
3,500 Kg |
Upper Lift Height: |
2,800 Mm |
Platform Size: |
5,400 X 2,600 Mm |
Pit Depth: |
750 Mm |
Hydraulic Oil: |
Synthetic ISO 32, -30 C |
Operating Temperature: |
-30 C To +45 C |
Power Supply: |
220V / 60Hz / 3 Phase |
Net Weight: |
2,400 Kg |
Warranty: |
24 Months |
Load Per Deck: |
3,500 Kg |
Upper Lift Height: |
2,800 Mm |
Platform Size: |
5,400 X 2,600 Mm |
Pit Depth: |
750 Mm |
Hydraulic Oil: |
Synthetic ISO 32, -30 C |
Operating Temperature: |
-30 C To +45 C |
Power Supply: |
220V / 60Hz / 3 Phase |
Net Weight: |
2,400 Kg |
Warranty: |
24 Months |
In an unheated garage in Calgary or Quebec City, hydraulic oil behaves differently for four months a year. Standard 46# oil becomes sluggish below minus 15 degrees, the pump draws high current on start up, and seals that were flexible in summer start to weep. This cold climate double deck car lift addresses all three: synthetic ISO 32 oil rated to minus 30 degrees, a thermostat controlled cabinet heater and low temperature polyurethane seals.
Each deck is rated 3,500 kg, the upper platform lifts to 2,800 mm, and the platform is 5,400 x 2,600 mm, which covers a pickup or a large SUV on either level. The deck edges are hot dip galvanized because road salt brine carried in on tyres is what destroys painted steel in Canadian garages, not the cold itself.
Key Features| Parameter | Specification |
|---|---|
| Rated Load Per Deck | 3,500 kg / 7,700 lb |
| Upper Deck Lift Height | 2,800 mm |
| Platform Size | 5,400 x 2,600 mm |
| Pit Depth Required | 750 mm |
| Hydraulic Oil | Synthetic ISO 32, pour point -30 C |
| Operating Temperature | -30 C to +45 C |
| Cabinet Heater | 60 degree C thermostat controlled |
| Power Pack | 5.5 kW, 220V / 60Hz / 3 Phase |
| Deck Surface | Checkered plate, galvanized edge |
| Lifting Speed | 3 m/min |
| Net Weight | 2,400 kg |
| Warranty | 24 months structure and power pack |
Residential garages, municipal works depots, snow clearing contractors and rural properties from Ontario to British Columbia use this model. Operators who park a plow truck below and a personal vehicle above value the 3,500 kg per deck rating, because a plow truck with a full salt spreader is heavier than a standard pickup rating allows.
Installation And Site PreparationSite preparation adds two winter details to the standard 750 mm pit: the sump is placed below the frost line with an optional heat trace, and the drain discharges to a floor trench rather than an exterior line that could freeze solid. We supply a winter commissioning checklist covering oil verification, heater circuit test and a fifteen minute cold soak before the first vehicle is loaded.
Market Fit And ShippingCanadian orders use CSA recognised components, 60Hz motors and bilingual English French manuals, with imperial hardware. Delivery to Vancouver or Montreal takes 20 to 24 days. Colder sites can add a 2 kW pit heater and an insulated pit cover, which keeps the hydraulic compartment above freezing without heating the whole building.
Build Quality And Quality AssuranceCold climate units are soaked at minus 25 degrees for four hours in our cold chamber, then cycled ten times to confirm the pump draws cleanly and no seal weeps. Feedback from Canadian and Nordic customers since 2014 shaped this design: the heater position, hose grade and galvanized deck edge all came from service reports rather than a catalogue specification.
Ordering NotesModel reference DDG3.5-2.8CC. Platform sizes, load ratings, drive type and finish can be customised; send your site dimensions, vehicle mix and electrical supply, and we will return a dimensioned proposal with drawings.