Product Details
Place of Origin: Shandong, China
Brand Name: Shandong Shiqi Machinery
Certification: CE
Model Number: DDG5-5.0BT
Payment & Shipping Terms
Minimum Order Quantity: 1 Set
Price: USD 9,200 - 10,400 / Set
Packaging Details: Plywood case and steel frame, seaworthy export packing
Delivery Time: 25-40 days after deposit
Payment Terms: T/T, L/C at sight
Supply Ability: 50 Sets per Month
Rated Load: |
5,000 Kg |
Vertical Travel: |
5,000 Mm |
Platform Size: |
5,400 X 2,600 Mm |
Pit Depth: |
900 Mm |
Cylinder: |
4 X 180 Mm Bore |
Power Supply: |
380V / 50Hz / 3 Phase |
Deck Surface: |
Checkered Plate + 40 Mm Lip |
Net Weight: |
4,200 Kg |
Warranty: |
24 Months |
Rated Load: |
5,000 Kg |
Vertical Travel: |
5,000 Mm |
Platform Size: |
5,400 X 2,600 Mm |
Pit Depth: |
900 Mm |
Cylinder: |
4 X 180 Mm Bore |
Power Supply: |
380V / 50Hz / 3 Phase |
Deck Surface: |
Checkered Plate + 40 Mm Lip |
Net Weight: |
4,200 Kg |
Warranty: |
24 Months |
Buenos Aires villas and Cordoba country houses often have a basement garage dug below street level with a ramp too steep for a low clearance car, or no ramp at all. A deep travel double deck car lift solves that by carrying the car vertically from basement to ground level over a 5,000 mm travel, with a second deck that parks another vehicle below.
The platform is 5,400 x 2,600 mm and rated 5,000 kg, which covers a pickup or a large SUV with margin. Four 180 mm cylinders push from four corners so the deck stays level across the full travel, and a 7.5 kW power pack at 380V 50Hz keeps the cycle under 50 seconds. The deck surface is checkered plate with a 40 mm entry lip that bridges the gap between platform and slab.
Key Features| Parameter | Specification |
|---|---|
| Rated Load | 5,000 kg / 11,000 lb |
| Vertical Travel | 5,000 mm, basement to ground level |
| Platform Size | 5,400 x 2,600 mm |
| Pit Depth Required | 900 mm below lower deck level |
| Hydraulic Cylinders | 4 x 180 mm bore, chrome plated rod |
| Power Pack | 7.5 kW, 380V / 50Hz / 3 Phase |
| Lifting Speed | 2.5 - 3 m/min |
| Deck Surface | Checkered plate with 40 mm entry lip |
| Pit Treatment | Hot dip galvanized frame, 85 micron |
| Water Management | Deck edge seal plus pit sump |
| Net Weight | 4,200 kg |
| Warranty | 24 months structure and power pack |
Residential villas with basement garages, small apartment buildings with underground parking, and hillside properties where a driveway cannot be cut into the slope use this specification. It is also used by restoration workshops that need to move non running vehicles between levels, since the deck accepts a wheel dolly or a pallet jack with the car on blocks.
Installation And Site PreparationThe civil work is the project: a shaft with 900 mm structural base, waterproofed walls, a sump with a submersible pump and a drainage line that does not back up in heavy rain. We supply the shaft drawing with rebar schedule, the anchor layout and the waterproofing detail at the ground level opening, and we review the contractor drawing before concrete is placed.
Market Fit And ShippingArgentine orders ship to Buenos Aires in 32 to 38 days with 380V 50Hz power packs and Spanish manuals. Because basement shafts vary in tolerance, we ask for measured shaft dimensions before fabrication and confirm them against the drawing; a 20 mm discrepancy at the bottom becomes a 100 mm problem at the top of a 5 m travel.
Build Quality And Quality AssuranceDeep travel lifts are tested through the full stroke rather than a short cycle: 30 complete up and down runs at rated load, a level check at five heights, and a water ingress test on the deck edge seal. Records are attached to the shipment, because on a basement installation the insurer will ask about both the structure and the water management.
Ordering NotesModel reference DDG5-5.0BT. Platform sizes, load ratings, drive type and finish can be customised; send your site dimensions, vehicle mix and electrical supply, and we will return a dimensioned proposal with drawings.