logo
Shandong Lift Machinery Co.,Ltd
Products
Products
Home > Products > Double Deck Car Lift > Rack Pinion Double Deck Car Parking System 6 Ton Safety Sensors PLC Control for German Commercial Garages

Rack Pinion Double Deck Car Parking System 6 Ton Safety Sensors PLC Control for German Commercial Garages

Product Details

Place of Origin: Shandong, China

Brand Name: Shandong Shiqi Machinery

Certification: CE

Model Number: DDG6-3.2RP

Payment & Shipping Terms

Minimum Order Quantity: 1 Set

Price: USD 8,600 - 9,800 / Set

Packaging Details: Plywood case and steel frame, seaworthy export packing

Delivery Time: 25-40 days after deposit

Payment Terms: T/T,L/C at sight

Supply Ability: 50 Sets per Month

Get Best Price
Highlight:

Rack Pinion Parking System

,

PLC Double Deck Lift

,

6 Ton Parking System

Total Load:
6,000 Kg
Load Per Deck:
3,000 Kg
Upper Lift Height:
3,200 Mm
Platform Size:
5,600 X 2,600 Mm
Drive:
Rack And Pinion
Power Supply:
400V / 50Hz / 3 Phase
Control:
S7-1200 PLC
Safety:
Photoelectric + Anti Fall
Net Weight:
3,400 Kg
Warranty:
24 Months
Total Load:
6,000 Kg
Load Per Deck:
3,000 Kg
Upper Lift Height:
3,200 Mm
Platform Size:
5,600 X 2,600 Mm
Drive:
Rack And Pinion
Power Supply:
400V / 50Hz / 3 Phase
Control:
S7-1200 PLC
Safety:
Photoelectric + Anti Fall
Net Weight:
3,400 Kg
Warranty:
24 Months
Rack Pinion Double Deck Car Parking System 6 Ton Safety Sensors PLC Control for German Commercial Garages

Mechanical rack and pinion drive is the specification German commercial operators usually ask for once a site passes a few hundred cycles a month. Instead of hydraulic pressure holding the platform, a motor drives a pinion along a fixed rack, and a mechanical anti fall device engages on every position. There is no oil to change, no seal to weep, and the platform holds position without hydraulic pressure.

This 6 ton double deck system lifts the upper platform to 3,200 mm on a 5,600 x 2,600 mm deck. A S7-1200 PLC manages travel, position, sensor logic and cycle counting, with a 7 inch HMI showing height, faults and maintenance due status. Photoelectric entry guards, an overload sensor and a slack chain detector are all interlocked, so travel stops before a fault becomes damage.

Key Features
  • Mechanical Rack And Pinion Drive: no hydraulic oil, no seal maintenance and no pressure loss; the platform holds position mechanically.
  • S7-1200 PLC With 7 Inch HMI: cycle counter, fault history and maintenance reminder, which fleet managers use to plan service intervals.
  • Photoelectric Entry Guards: light curtains on the deck edges halt travel if a person or object enters the zone.
  • Mechanical Anti Fall Device: engages automatically during ascent, independent of the drive and of the PLC.
  • Slack Chain And Overload Detection: sensors stop the drive before a jammed platform or an overloaded deck damages the mechanism.
  • 6,000 kg Capacity On A 5,600 mm Deck: covers two full size SUVs or a van above a sedan.
  • Low Maintenance Duty: no oil changes and no filter service, which suits unmanned commercial sites and apartment garages.
Technical Specifications
Parameter Specification
Total Rated Load 6,000 kg / 13,200 lb
Rated Load Per Deck 3,000 kg / 6,600 lb
Upper Deck Lift Height 3,200 mm
Platform Size 5,600 x 2,600 mm
Drive System Rack and pinion, 5.5 kW gear motor
Power Supply 400V / 50Hz / 3 Phase
Control System  S7-1200 PLC + 7 inch HMI
Safety Devices Photoelectric guards, anti fall device, slack chain, overload
Lifting Speed 3 m/min
Pit Depth Required 700 mm
Net Weight 3,400 kg
Standard EN 14010 oriented design, CE 2006/42/EC
Applications

Apartment garages, office building parking, hotel staff parking and municipal facilities in Germany, Austria and Switzerland use this drive type where maintenance access is limited and unmanned operation is normal. Because there is no hydraulic oil, the unit is also preferred where a pit leak would be a compliance problem.

Installation And Site Preparation

Site work is a 700 mm pit with a flat floor and a 400V 50Hz feed. We supply the structural drawing, anchor layout and cable route, and the PLC program is tested on our bench before shipping with the site parameters pre loaded. Commissioning includes a 50 cycle run, sensor trip test at each deck edge and a mechanical anti fall drop test, all recorded in the handover file.

Market Fit And Shipping

German, Austrian and Swiss orders use 400V 50Hz, IP54 panels,   Schneider components and DGUV oriented labelling. Delivery to Hamburg or Bremerhaven takes 28 to 34 days. Spare parts are held as a recommended kit: one pinion set, photoelectric sensors and a PLC battery, which covers the realistic first five years of use.

Build Quality And Quality Assurance

Rack and pinion units live or die on gear alignment and structural stiffness, so we check pinion to rack backlash at four positions on every unit and reject anything outside tolerance. The frame is proof loaded at 1.2 times capacity with the platform at mid travel, which is the worst case for the columns rather than the top position.

Ordering Notes
  • Confirm daily cycle count and whether the site is manned.
  • HMI language pack and access control integration can be specified.
  • Pit drainage is not required for this drive type, which simplifies civil works.
  • Lead time is 35 to 40 days including PLC configuration and bench test.

Model reference DDG6-3.2RP. Platform sizes, load ratings, drive type and finish can be customised; send your site dimensions, vehicle mix and electrical supply, and we will return a dimensioned proposal with drawings.